RJG IA2-M-DFT, Product Manual

Page: 5 / 20

Product Manual | Lynx™ Digital Flow‑Temperature Interface Module IA2‑M‑DFT RJG, Inc. iii
INTRODUCTION
Read, understand, and comply with all following
instructions. This guide must be kept available
for reference at all times.
DISCLAIMER
Inasmuch as RJG, Inc. has no control over the
use to which others may put this material, it
does not guarantee that the same results as
those described herein will be obtained. Nor
does RJG, Inc. guarantee the effectiveness or
safety of any possible or suggested design for
articles of manufacture as illustrated herein by
any photographs, technical drawings, and the
like. Each user of the material or design or
both should make his own tests to determine
the suitability of the material or any material
for the design as well as the suitability of the
material, process, and/or design for his own
particular use. Statements concerning possible
or suggested uses of the material or designs
described herein are not to be construed as
constituting a license under any RJG, Inc. patent
covering such use or as recommendations
for use of such material or designs in the
infringement of any patent.
PRIVACY
Designed and developed by RJG, Inc. Manual
design, format and structure copyright 2019
RJG, Inc. content documentation copyright
2019 RJG, Inc. All rights reserved. Material
contained herein may not be copied by hand,
mechanical, or electronic means, either whole
or in part, without the express written consent
of RJG, Inc. Permission will normally be granted
for use in conjunction with inter‑company use
not in conflict with RJG’s best interests.
ALERTS
The following three alert types are used as
needed to further clarify or highlight information
presented in the manual:
Term
A definition of a term or terms used in the
text.
NOTE
A note provides additional information
about a discussion topic.
CAUTION
A caution is used to make the
operator aware of conditions that can cause
damage to equipment and/or injury to personnel.