RJG 211M18, Product Manual

Page: 17 / 40

Product Manual | Piezoelectric Load Washer Sensor 211M18 9
ALTERNATE INSTALLATION OVERVIEW
If the head of the ejector sleeve does not
contact at least 80% of the loading surface,
a spacer must be created to facilitate the
correct loading.
A channel is machined into the mold for
the sensor cable and sensor head. The
sensor head is placed under the spacer
and ejector sleeve in the mold ejector
retainer plate. An ejector sleeve core pin
extends through the sensor head, spacer,
and ejector sleeve into the mold cavity.
The sensor cable is attached to a sensor
adapter mounted outside of the mold.
TOP OF MOLD
A
A
SENSOR
ELECTRONICS
CASE