ULB-362B Underwater Locator Beacon
8
User’s Manual
January 2018
Installation Procedures for ULB-362/PL
Carefully unpack the beacon and inspect it for shipping damage. If any
damage is evident, it should be reported to the freight carrier and to RJE
International, Inc.
To mount the beacon, perform the following steps:
1. Ensure the beacon is mounted in the vehicle so that it has a clear path to send
the acoustic signal. Avoid mounting it behind other equipment.
2. Mount the beacon with the water switch down to prevent accidental activation.
3.
Male E/O Pigtail Connector, provided with the unit, is wired to
Vehicle’s
electronics module through a penetrator.
4.
A ‘normal
ly
closed’ electrical relay is installed in electronics module of the
Vehicle. This relay is wired
to the vehicle’s power supply. (see below diagram)
Figure 3-4 Wiring Diagram of the ULB-362PL/B37
