4
TAC-200D Revision 5
INTRODUCTION
The TAC-200D Diver Navigation Board was developed and is used by
divers for accurately navigating underwater. Highly reliable and rugged,
the TAC-200D consist of three major components: a rugged high im-
pact plastic board (p/n TAC200-1), a large underwater compass (p/n
TAC200-2), a digital depth gauge with timer (DG100). The TAC-200D
is supplied in a padded carrying case (p/n TAC200-4).
The TAC-200D allows the diver to monitor depth, direction and leg
time. By using this information, a diver can plot and follow a planned
course during a dive with a high level of reliability.
TAC-200D Diver Navigation Board
DG100 Digital
Depth with Timer
TAC200-2 Compass
TAC200-1 Dive Board
TAC-200D Revision 5
9
•
SURFACE MODE WITH BATTERY
CHARGER CONNECTED
When the unit is connected to the charger
cable it will automatically enter
SURFACE
MODE
. Functions are identical with the ex-
ception of the A & B Button Together.
A-Button and B-Button Together will toggle the unit between Imperial
and Metric depth units. The corresponding
Status LED will subsequently be illumi-
nated.
•
HIBERNATIO MODE
In
HIBERNATION MODE
the screen will
not display any information. To wake unit,
press either the A or B button momentarily.
When the unit wakes from
HIBERNATION
MODE
the six digit serial number is shown
on the top row of the display and battery
health is shown as a percentage, 100% =.
3.7V, 0% =3.0V.
•
BATTERY CHARGING
The DG100 comes with a rechargeable battery that provides up to 20
hours of continuous use. The battery, can be recharged over 300
times before having to replace the unit. Upon activation, the display
briefly indicates the battery health in a form of percentage, 100% is
fully charged. It is recommended that you charge the DG100 before
every dive.
To charge the DG100, remove the bat-
tery charge cap from
the back of the unit by
turning it counter
clockwise until the slots line up. Use a
flat object to lift the cap from the body of the DG100.
Battery
Charging Cap
