Warning!
Injury can occur during work on the tines. Wear protective gloves.
Whenever possible, clean the application straight after you have finished
working on the lawn.
Clean the underside of the housing around the tines and the protective
shield and fender with a scrubbing brush, and brush or soft cloth
dampened with a mild soap and water mixture. Never splash with water!
To remove soil and debris from the tines and transmission, use a stiff brush
or a dampened cloth.
Clean the ventilator, and remove any remaining grass or dirt.
Once cleaned, wipe the tine and shaft dry and apply a light coat of oil.
STORING
The application should be stored in a dry and clean room and out of reach of
children.
During extended periods of storage, during the winter for example, ensure that
the application is protected against corrosion and frost.
At the end of the season, or if the application is not to be used for longer than a
month:
Clean the application.
Wipe over all metal surfaces with an oil-impregnated cloth to protect them
from corrosion (non-resinous oil), or spray a fine coat of oil onto them from
a can.
Fold the guide bar down, and store it in a suitable place.
DISPOSAL
Do not dispose of power tools into household waste! According
the European Guideline 2012/19/EU for Waste Electrical and
Electronic Equipment and its implementation into national right,
power tools that are no longer usable must be collected separately
and disposed of in an environmentally correct manner.
Never dispose the residual fluids into household waste too. It must be
collected separately and disposed of in an environmentally correct manner too.
TROUBLESHOOTING
Breakdown service
The following table shows the types of breakdowns and indicates how you can
correct it if your machine does not function correctly. If in spite of this, you do not
manage to locate the problem and solve it, contact your after-sales service.
Caution: Before starting troubleshooting, stop the appliance and
disconnect the power plug.
Motor does
No electricity
Check mains connection
