Model
RET 3275
Voltage:
230V, 50 Hz
Power consumption
750 W
Idle Speed:
380min
-1
Working width
32 cm
Tines diameter
20,5 cm
Noise pressure level LpA
79dB(A) k=3 dB(A)
Noise power level LwA
93 dB(A) k=3 dB(A)
Vibration
L=1,153 m/s
2
, R=1,158 m/s
2
, K =
1,5 m/s
2
Noise/Vibration Information
Measured sound values determined according to EN 709.
Vibration total values (triax vector sum) determined according to EN 709.
:
The vibration emission level given in this information sheet has been
measured in accordance with a standardised test given in EN 709 and may be
used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the
tool. However if the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into
account the times when the tool is switched off or when it is running but not
actually doing the job. This may significantly reduce the exposure level over
the total working period.
Identify additional safety measures to protect the operator from the effects of
vibration such as: maintain the tool and the accessories, keep the hands warm,
organisation of work patterns.
DESCRIPTION OF THE SYMBOLS
The use of symbols in this manual is intended to draw your attention to
possible risks. The safety symbols and the explanations that accompany them
must be perfectly understood. The warnings in themselves do not remove the
risks and cannot replace correct actions for preventing accidents.
