Transport
Caution! Before transporting the application, switch off the motor.
The tines and the unit maybe damaged even if you move the application with
the motor switched off, e.g. over solid ground. Prevent the tines from touching
the ground by carrying out the application by its guide bar.
Clearing tines of foreign objects
During operation, a stone or root could become lodged in the tines, or tall
grass or weeds may become wrapped around the tine shaft.
To clear the tines, release the trigger lever. Unplug the tiller, and dislodge or
remove any obstacles from the tines or tine shaft.
To ease removal of tall grass or weeds that are wrapped around the tine shaft,
remove one or more of the tines from the tine shaft. See tine removal and
Installation in the manual.
Tines removal and Installation (Fig. 6)
Worn tines invite poor performance and overload of motor.
Check before each use the tines situation. Sharpen or replace the tines with
new one when necessary. It is recommended to do this by a specialist.
Caution!
Disconnect the mains and wear protective gloves.
To remove the complete tines from the shaft:
Remove the M8X40 hex head bolt from the end of the shaft.
Take off the tine set from shaft.
Reverse above steps to install tines.
