Menu Operation
28
Configuring the Option Menu
■
Language: Select your preferred On Screen Display language.
■
Caption: You can select Caption, if available, to be displayed on screen.
■
Restore Factory Default: Restore the system settings to the factory default. When
the restore is complete, the TV will enter standby mode.
■
Auto Sync: Switches the Auto Sync function on or off.
■
Clock: You can display either the DTV Signal Stream Time or set the System Time.
■
Sleep Timer: Select the time to turn the TV to standby mode automatically.
■
Time Zone: Select your time zone.
■
Software Update (USB): Update the TV with the latest firmware by USB.
PVR Function Operation Instruction
Preparing
Plug USB flash drive or USB hard disk into USB slot on the TV set.
NOTE:
•
USB disk should have capacity at least 512MB.
•
USB device must support USB 2.0 high-speed specification.
Turn TV in to DTV channel, the PVR function can only be used in DTV mode;
Then press MENU button on the remote to bring the main menu up, press arrows
button to highlight OPTION menu, and then press the OK button;
Press
▲
/
▼
buttons to highlight PVR File System (In DTV mode), then press OK
button to go into submenu.
Setting
–
Select Disk: Select a disk used for PVR.
NOTE:
•
Some models have two USB input and several disk can be used when two USB