background image

Menu Operation 

27 

 
Playing back shared contents   
1.
Start  the  server  on  your  computer  or  other  device  that  connected  on  your  home 

network.   

2. Press the Smart TV button on the remote control.   
3. Press the arrow buttons to select FILE SHARE, and press OK.   
4. Press the 

/

 button to select Movie, Music, Photo or File, and then press the OK 

button.   

5. Press the arrow buttons to select your computer or other device, and press OK.   
6. Press the arrow buttons to select a folder you want, and then press the OK button.   
7. Press the arrow buttons to select files you want, and then press the OK button 

to mark. Press 

 

  button to play. 

NOTE: 

    The TV may not properly play the files produced with certain encoders. 

    The  TV  may  not  smoothly  play  the  video  files  with  a  resolution  higher  than  the 

supported resolution for each frame. 

    The TV supports the H.264/AVC codec up to the profile level 4.1. 

    If you play a video file through the USB connection that does not support the high 

speed, the video player may not work properly. 

    Video file names that contain special characters may not be playable. 

    The  playback  of  videos  may  be  paused,  stopped  or  buffering  occurring  often 

depending on your broadband speed. 

    To play the file on the media server, the TV and the media server must be connected 

to the same access point. You are recommended to locate both TV and PC in same 
subnet. The first 3 parts of the subnet address of the TV and the PC IP addresses 
should  be  the  same and only the  last part  (the  host  address)  should  be  changed. 
(e.g.

 

IP Address: 123.456.789.**) 

    Check your network settings when the File Share option does not work properly. 

    When the network is unstable, the device may be slower or may need to load during 

playback. 

    There  may  be  some  restrictions  by  file  features  and  the  media  server  that  restrict 

playback. 

    When  selecting  Full  Screen  in  File  Share  mode,  the  ratio  of  the  outputted  screen 

may differ from the original. 

    If there are too many folders and files in one folder, it may not operate properly. 

    Movie  thumbnail  is  only  supported  when  File  Share  server  supports  a  Movie 

thumbnail. 

    Files in a folder can be played only when they are of the same type. 

    The subtitle file name and movie file name have to be the same and located in the 

same folder. 

    If subtitle files have been added after a directory has been indexed already, the user 

has to remove and readd the folder to the list of shares. 

    The  playback  and  operating  quality  may  be  affected  by  your  home  network 

condition. 

    The files from removable media such as USB drive, DVD-drive etc. on your media 

server may not share properly. 

 

Summary of Contents for RLED-DSG32CHD1000







































Reviews: