Menu Operation
16
Wired.
–
Configuration
:
Press the
▲
/
▼
button to select Configuration, and then press the
OK button.
Network Config.: Select DHCP to set the IP address, netmask, gateway and DNS
values automatically, or Static to set them manually.
IP:
The TV’s IP address.
Netmask: Value of the Netmask.
Gateway: Address of the Gateway.
DNS: Address of the DNS.
–
MAC Address: Display the mac address.
Wired Network Setup
–
How to set up automatically (Wired)
Use the Automatic Network Setup when connecting your TV to a network that
supports DHCP.
1. Connect your TV to your LAN as described in the previous section.
2. Turn on your TV, press the MENU button on your remote, use the arrow buttons
to select NETWORK, and then press the OK button.
3. Use the
▲
/
▼
button to select Network, and then press the
◄/►
button to select
Wired.
4. Select Configuration then press the OK button.
5. Set Network Config. to DHCP.
6. Auto acquires and enters the needed Internet values automatically.
7. If the Network Function has not acquired the network connection values, go to
the directions for Manual.
–
How to set up manually (Wired)
Use the Manual Network Setup when connecting your TV to a network that
requires a Static IP address.
1. Follow Steps 1 through 4
in the “How to set up automatically” procedure.
2. Set Network Config. to Static.
3. Press the
▲
/
▼
button to highlight IP, and then press the OK button.
4. Press the
▲
/
▼
button to highlight the field you want to change, and then use the
number buttons to input the IP address. Press MENU key to return.
5. Press
▲
/
▼
to highlight Net mask, Gateway and DNS, and edit in the same way
as IP address.
6. When done, select the OK and press OK to connect the internet.
NOTE:
•
IP, Net mask, Gateway and DNS address field numbers must be between 0 and
255.
• If you manually set the IP address, you must not use the
same IP address for any
other device. The IP address you use should be a private address.