Rivet King FreeSet RK-777-1, Manual, Page: 17 / 31

13
4 OPERATION
4.1 Quick Start
This section describes how to start operating the RK-777-1 FreeSet and setting rivets.
See section x for details about additional setup options on RK-777-2 and RK-777-3 in
the FreeSet Manager Software.
4.2 Checklist
Check the following before using the riveting tool:

The housing is closed and there are no obvious defects

The battery is correct for the riveting tool and shows no damage

The nosepiece fi ts the rivets to be used.
If the rivet does not fi t into the nosepiece or is too loose, another
nosepiece must
be used.

The mandrel container is attached
Note!
Only batteries approved by Industrial Rivet and Fastener Co., Inc for
use in FreeSet tools may be used.
Using incorrect batteries can ruin both the batteries and the riveting
tool. Industrial Rivet assumes no liability for the use of incorrect
batteries