Rivet King FreeSet RK-777-1, Manual, Page: 13 / 31

9
2.16 Cleaning the tool and disposal
Handling and disposal of used substances and chemicals, especially when cleaning with
solvents.
Do not place used batteries into housesold garbage, fire or water. Ask the dealer
or manufacturer to handle disposal.
2.17 Risk of injury and tool damage
1. Attach the mandrel collection container before using the tool. Failure to do so
will allow the mandrels to be thrown off when they detach, which may result
in injury.
2. Make sure that there are no damaged tool parts. All damaged parts must be
repaired before use.
3. Working with damaged tool parts creates the risk of injury. If you work in an
elevated area, wear a safety harness, be mindful of falling rivets, and avoid
dropping the tool. Failure to do so could result in injury and substantial
damage.
4. Remove the battery before cleaning or performing general maintenance on the
tool.
5. Keep your face away from the exhaust vents.
6. Avoid skin contact with substances such as lubricants and grease.
These
substances are flammable on the skin. If you should come in
contact with
them, wash the affected area carefully.
7. Avoid unsafe working positions. You could fall and injure yourself.
8. Take good care of your tool. Follow the operating instructions for maintenance
and cleaning. Keep the handgrip free from lubricants and dirt.
9. Use the tool carefully and make sure to operate it correctly. Use the tool with
care. Proper working conditions should exist. Maintain concentration and
focus while working.