Riverstone Networks RS Switch Router User Guide Release 8.0 31-5
Service Configuration
Creating a Service
Here is an example:
31.2.3
Per-Flow Rate Limiting Service
Per-flow rate limiting is enabled on the RS by default. If aggregate rate limiting is enabled on a particular line card,
per-flow rate limiting policies can not be applied to ports on that line card.
To create a per-flow rate limiting service, use the following command:
Here is an example:
! Create a flow-aggregate service, limiting an aggregate flow to 10 million bps, drops packets if the rate is exceeded
! and distributed across 10 flows
rs(config)# service testaggregate create rate-limit flow-aggregate rate 10000000
exceed-action drop-packets distribute-among 10
Create a per-flow
rate limiting service.
service
<
name
>
create
rate-limit
per-flow
rate
<
rate
> [
exceed-action
<
drop-packets
|
set-priority-low
|
set-priority-medium
|
set-priority-high
> |
time-select
<
num
>]
! Create a per flow service, limiting one flow to 1 million bps and drops packets if the rate is exceeded
rs(config)# service user1flow create rate-limit per-flow rate 1000000 exceed-action
drop-packets
