17-20 Riverstone Networks RS Switch Router User Guide Release 8.0
RSVP Configuration
MPLS Configuration
intervals. On the RS, the default interval for sending message acknowledgements is 1 second. You can change this
interval with the
rsvp set global msgack-interval
command. For example, the following command sets the
transmission of message acknowledgements to 3-second intervals:
17.3.7
Displaying RSVP Information
Table 17-4
is a summary of the RSVP session information that you can display on the RS and the CLI commands that
you use to display the information.
rsvp set global msgack-interval 3
Table 17-4 RSVP session information
To see this information:
Use this command:
RSVP global, path state block, reservation state block, traffic control
state block, session, and neighbor information.
rsvp show all
RSVP global parameters
rsvp show global
RSVP interface parameters
rsvp show interface
RSVP neighbors, next-hop, and number of sessions
rsvp show neighbors
RSVP path state block information
rsvp show psb
RSVP reservation state block information
rsvp show rsb
RSVP session information
rsvp show session
RSVP traffic control state block information
rsvp show tcsb
