Check for parts online at
www.HuntRiversEdge.com
or call 800-450-EDGE (3343) M-F 8-5
5
Operator's Manual
Syct
™
2-Man Ladder Stand
FIGURE 1
27
23
7
ASSEMBLY INSTRUCTIONS
Tools needed: two 7/16" wrenches
IMPORTANT ASSEMBLY TIP:
Do not tighten any nut and bolt combinations completely
until all parts are assembled together! Finger tighten
plus one turn of a wrench only! This will temporarily hold
the lock nut on the bolt while helping alignment of all
parts! After all parts are assembled together, all nut & bolt
combinations must be completely tightened.
All assembly must be done in this order at ground
level before uprighting.
Do not remove labels/warnings from product, they are
there for your safety.
Recommended for adult use only.
1. Attach the two foot platforms (7) together using two 1/4-20 x 2-1/4”
bolts (23) and locknuts (27). SEE FIGURE 1.
2. Attach the two platform J-pipes (6) to the assembled platforms
using four provided 1/4-20 x 2-1/2” bolts (24), steel washers (29)
and locknuts (27). SEE FIGURE 2.
NOTE: Mesh surface of foot platforms should be on top.
3. Attach the tree blade (10) to the platform J-pipes (6) using two
provided 1/4-20 x 2-1/2” bolts (24), steel washers (29) and locknuts
(27). SEE FIGURE 2.
4. Attach the two side seat support loops (8) to the rear platform
using four provided 1/4-20 x 2-1/4” bolts (23), steel washers (29)
and locknuts (27). SEE FIGURE 3.
5. Attach the two ladder platform braces (11) to the side seat
support loops (8) and rear platform (7) using four provided 1/4-20
x 1-1/2” bolts (22) and locknuts (27). SEE FIGURE 3.
6. a. Attach the upper tree blade frame (9) to the inside of side seat
support loops (8) using four 1/4-20 x 2-3/4” bolts (25), two steel
washers (29), four nylon spacers (31), four yellow washers (30)
and four locknuts (27). Blade should be on bottom side, towards
platform. SEE FIGURE 4.
b. Press the two rubber bumper stops (32) into the top-side holes of
the upper tree blade frame (9). SEE FIGURE 4.
6
10
FIGURE 2
24
29
24
29
27
23
FIGURE 3
8
27
29
22
22
11
7
27
27
FIGURE 4
31
8
32
30
25
30
29
25
9