background image

Operator's Manual

Syct

 2-Man Ladder Stand

Check for parts online at 

www.HuntRiversEdge.com

 or call 800-450-EDGE (3343) M-F 8-5

2

Operator's Manual

Syct

 2-Man Ladder Stand

INTRODUCTION

Rivers Edge® Treestands are engineered with you the hunter in mind. We appreciate your purchase of one of our world 

class treestands. Follow these few simple instructions and your stand will provide you many years of trouble-free plea-

sure. Instructions should be kept in a safe place and reviewed at least annually. 
If for any reason you have a problem with your product, DO NOT return to the retailer, contact the Rivers Edge® cus-

tomer service department at 800-450-EDGE (3343) for assistance.

CONTENTS

Introduction/Warranty ..................................................................................................................................................................................................................2
Warnings .........................................................................................................................................................................................................................................3-4
Inspection and Maintenance ......................................................................................................................................................................................................4
Assembly Instructions ...................................................................................................................................................................................................................8
Warnings .............................................................................................................................................................................................................................................9
Set Up and Use Instructions ...............................................................................................................................................................................................10-11
Finish Ladder .................................................................................................................................................................................................................................. 12
Bolt Identification Chart ............................................................................................................................................................................................................. 13
Parts Breakdown .....................................................................................................................................................................................................................14-15

 

WARRANTY

RETI offers a one year warranty for all components of the treestand.  These warranties apply to the original owner with a proof of purchase.  These warranties 

begin on the date of purchase by the first retail consumer and continue for the period specified above.  These warranties apply to products that are not 

modified, abused or used in a manner that deviates from the product’s intended usage.  Minor fading in color is normal and is not covered by warranty.  

Any corrosion of painted surfaces that occurs as a result of paint being removed or damaged is also not covered by warranty. RETI offers no other warranty 

expressed or implied.  Products for which warranty work has been approved must be sent directly to RETI and performed by RETI. To obtain warranty service 

and/or replacement instructions, you must obtain prior approval from RETI before shipping your package to us by calling our customer service 

department at 800-450-3343 or by writing to: RETI, P.O. Box 755, 1160 Eighth Avenue, Cumberland, WI 54829 for a return material authorization 

number (RMA#). All items must be shipped prepaid. RETI will, at no charge, repair or replace, in RETI’s sole discretion, any product that satisfies the conditions 

stated above. RETI retains the right to change models, specifications and price without notice.

This equipment has been manufactured under strict quality and safety guidelines. As with any equipment of this type, full understanding of the instructions 

and its use is mandatory and imperative for the safety of its user. RETI is not responsible for any damages or injuries sustained due to improper use or 

modification of any of its products, or resulting from any use which deviates from the product’s intended usage. RETI is not responsible for any injuries 

sustained due to failure to read and adhere to the instructions for use. Any misunderstanding or questions regarding the products of their use should be 

directed to RETI prior to any use. All RETI treestands are sold with a full body harness (“Fall Arrest System”) that meets standards recognized by the 

Treestand Manufacturer’s Association (“TMA”). It is the owner's sole responsibility to inspect the product regularly for damage, improper installation, or 

conditions that could jeopardize the ultimate safety of the product. Failure to use or improper use of the provided Fall Arrest System may result in serious 

injury or death. ALWAYS wear the provided Fall Arrest System while using this product.  Owner is responsible to understand and follow product field 

weight rating and must never exceed maximum weight rating. RETI is not responsible for any malfunction or injury resulting from normal wear and tear, 

damage caused by improper use, improper maintenance, negligence or accidents. This product, if used safely as intended, will provide trouble free service 

for the useful life of the product. We hope you will enjoy the quality of our products for years to come, and have a safe hunt.

Summary of Contents for Syct RE642

















Reviews: