STEP3
STEP3:
1. Attach 6 cross bars (1) to the pre-assembly middle panel and right side panel unit.
2. Insert 6 screws (B) into the holes on the middle panel (4) then tighten into the holes of the 6 cross bars (1) by
using an Allen wrench
STEP4
STEP4:
1.Insert the other 1 cross bars (1) into the pre-drilled holes on the middle panel (4) .no screws needed.
2.Determine the top & bottom of 6 space cubby (7), then slide the four hanging loops of the 6 space cubby (7) over
the four cross bars (1).(make sure the 6 space cubby (7) is in correct position - top to bottom, see insert
drawing).
3.Determine the top & bottom of 2 space book/magazine holder (8), then slide the four hanging loops of 2 space
book/magazine holder (8) over the four cross bars (1).(make sure the 2 space book/magazine holder (8) is in
correct position - top to bottom, see insert drawing). Finished stitch side of cubby shelf, is the top side
