STEP5
STEP5:
1. Attach the left side panel (2) to the pre-assembly middle and right side panel unit.
2.Insert the other 1 cross bars (1) into the pre-drilled holes on the left side panel (2), (no
screw hole)
3.Insert 6 screws (B) into the holes on the left side panel (2) then tighten into the holes of the 6 cross bars (1) by
using an Allen wrench.
STEP6
STEP6:
1.Attach the back board (5) to the back of cabinet by inserting 6 back screws (D) into The holes on the back board
(5) and tighten into the back of cabinet by using a Philips Screwdriver.