ASSEMBLE DOOR
6
SELECT:
2 x 1.810 m Door Sheets (Narrow)
2 x 0.945 m Door Top/Bottom Flashings
2 x 1.810 m Door Side Flashings
3 x Hinges
1 x Padbolt Support Flashing
2 x 1.160 m Door Brace Flashings
54 x Rivets
STEP 1:
Lay out door sheets on a flat surface
making sure narrow pans are on the
outside.
Rivet sheets together in the centre en-
suring ends are flush with each other.
STEP 2:
Position door side flashings and top
and bottom flashings and assemble
door as shown.
Drill and rivet as per diagram.
STEP 4:
On the back of the door, place door braces in posi-
tion as shown in fig.3.
Ensure that the top and bottom ends of the braces
are under the door flashings as shown in fig.4. and
opposite ends of the braces overlap in the middle.
Rivet door brace flashings onto back of door as
shown. Where possible, rivet from front of door
.
fig.1
STEP 3:
Attach hinges to door side flashing using rivets provided.
Ensure hinge is flush with back of door, and 60mm in from
each end as per fig.2.
Using one rivet, attach padbolt support as shown in fig. 1.
NARROW PANS
fig.3
fig.4
fig.2
