TF2089904-RG-00 English
Page 4 of 23
20170516 V.4
WARNING
Installation Safety Precautions.
Use appliance only with LP (propane) gas and the regulator / valve assembly supplied.
Installation must conform with local codes or, in the absence of local codes, with the
National Fuel Gas Code, ANSI Z223.1/NFPA 54
,
Storage and Handling of Liquefied
Petroleum Gases, ANSI/NFPA 58;
or
Natural Gas and Propane Installation Code
,
CSA
B1 49.1.
This appliance shall be used only
outdoors, and shall not be used in a
building, garage or any other
enclosed area.
Use appliance at least 10 ft. from
any wall or surface. Maintain 10 ft.
clearance to objects that can catch
fire or source of ignition such as
pilot lights on water heaters, live
electrical appliances, etc. Never
use under balconies made of wood
or ANY overhead construction.
Apartment Dwellers: Check with management to learn the requirements and fire codes
for using an LP Gas appliance at an apartment. If allowed use outside at an apartment. If
allowed, use outside on the ground floor with a ten (10) foot clearance form walls or rails.
Before opening LP tank valve, check the coupling nut for tightness. When appliance is
not in use, turn off control knob and LP tank valve.
Never move appliance while in operation or still hot.
If you notice grease or other hot material dripping from appliance onto valve, hose or
regulator, turn off gas supply at once. Determine the cause, correct, clean and inspect
valve, hose and regulator before continuing. Perform a leak test.
The regulator may make a humming or whistling noise during operation. This will not
affect safety or use of appliance.
Clean and inspect the hose before each use of the appliance. If there is evidence of
abrasion, wear, cuts or leaks, the hose must be replaced prior to the appliance being put
into operation.
