TF2089904-RG-00 English
Page 9 of 23
20170516 V.4
Lighting Instructions
Note: Do Not lean over LP cooker while lighting.
Step
Procedure
Illustration
1.
Read all instructions before lighting.
2.
Turn regulator control valve to OFF position.
3.
Fully turn timer control knob clockwise.
4.
Fully open LP tank valve.
5.
Light match and place it over burner.
Tip: Wooden kitchen match works best.
6.
PRESS and continually HOLD down push
button of safety valve while slowly turning ON
the regulator control valve. Continually hold
down the push button of the safety valve. DO
NOT stand with head or arms over cooker.
7.
After burner is lit, continue to HOLD the push
button for 10 seconds and then release.
Holding push button of safety valve for less
than 10 seconds will cause burner flame to go
out.
8.
If ignition does not occur in 5 seconds, turn the regulator and LP tank valve off, wait
5 minutes, and repeat the lighting procedure.
9.
Check the position of thermocouple, make sure
the flame has full contact with the
thermocouple.
Note: If thermocouple does not have full
contact with flame, unit will not stay lit.
10.
Cycle time for timer is around 15 minutes. If the timer is not reset within around 15
minutes, the burner will shut OFF automatically. If this occurs, please follow
lighting instructions and continue to cook.
HOLD the
Push
button of
safety
valve
