background image

SC2210401-RG 

– ENG

 

                           

  23 of 24 

 

20150819-V1 

LIMITED WARRANTY 

 

1.  Manufacturer warrants this Product to be free from defects in workmanship and materials for a period of 90 days 

from the date of purchase, PROVIDED claims are submitted, in writing, with proof of purchase.     

2.  If  any  part  of  this  item  fails  because  of  a  manufacturing  defect  within  the  Limited Warranty  Period,  Manufacturer 

offers to replace such part(s) provide that such parts have not been improperly repaired, altered, or tampered with or 

subject to misuse, abuse or exposed to corrosive conditions. This Limited Warranty is, however, subject to certain 
limitations,  exclusions,  time  limits  and  exceptions  (Hereinafter  “Conditions”)  as  listed  below.    Read  these 
Conditions carefully. 

3.  This Limited Warranty shall be limited to the replacement or repair of any part(s) which Manufacturer determines, 

after reasonable examination, to have been defective at the time of manufacturing and manufacturer’s obligation(s) 
shall be limited to replacement, if any, of defective part(s) which sh

all be shipped at Original Purchaser’s expense to 

Original Purchaser’s designated shipping address. 

4. 

This Limited Warranty is given to and covers the 

ORIGINAL PURCHASER ONLY 

and such coverage terminates 90 

days from the date of purchase.

 

5. 

DAMAGE LIMITATION WARNING:   

IN  NO  EVENT  SHALL  MANUFACTURER  BE  LIABLE  FOR  ANY 

INCIDENTIAL OR CONSEQUENTIAL DAMAGES, INCLUDING (BUT NOT LIMITED TO) LOSS OF USE OF THE 

PRODUCT,  LOSS  OF  TIME,  INCONVENIENCE,  EXPENSES  FOR  TRAVEL,  TRANSPORTATION,  LODGING 

EXPENSES,  LOSS  OF  FOOD,  LOSS  BY  DAMAGE  TO  PERSONAL  PROPERTY  OR  LOSS  OF  INCOME, 

PROFITS OR REVENUE. 

6. 

MANUFACTURER’S  OBLIGATION:

   

Manufacturer’s  liability  shall  be  limited  to  the  delivery  of  a  good, 

merchantable Product and, if necessary, the repair or replacement, at manufacturer’s option, of any defective part or 
unit. 

7. 

TRANSFER  LIMITATIONS:

    This  Limited Warranty  is  not  assignable  or  transferable.    It  covers  only  the  original 

purchaser. 

8. 

RESERVED RIGHT TO CHANGE:

    Manufacturer reserves the right to make changes or improvements to products 

it produces in the future without imposing on itself any obligations to install the same improvements in the products it 

has previously manufactured. 

9.  This Limited Warranty gives the Original Purchaser specific legal rights but there may be other rights which vary by 

jurisdiction. 

10.  This warranty does not cover the following items: 

 

Chips or scratches on porcelain or painted surfaces 

 

Rust or corrosion is not deemed a manufacturing or materials defect 

 

Discoloration or loss of paint due to handling during assembly, heat or cleaning products.    Paint may require 

touch up. 

 

Stainless steel discoloration or corrosion 

 

IF CUSTOMER SERVICE IS NECESSARY:

 

 

1. 

The  Original  Purchaser  is  responsible  for  shipping  and  handling  charges  of  the  returned  item(s)  and 

replacement parts, if any. 

2. 

All parts to be replaced will need to be shipped before replacement items will be sent. 

3. 

Follow  the  Customer  Service  Representative’s  instructions  exactly.    If  a  return  is  necessary,  it  must  be 
packed carefully and shipped prepaid. 

 

 

Summary of Contents for Cattleman SC2210401-RG

























Reviews: