EN
Multiprocess 175. Operating manual.
Multiprocess 175. Operating manual.
37
36
14. Recommended safety guidelines.
13. Warranty information.
13.3 Warranty period
The warranty is valid for 12 months from the date of purchase provided
the machine is used within the published specification limits.
13.4 Warranty repairs
A Ryval approved service provider must be informed within the warranty
period of any warranty defect. The customer must provide proof of
purchase and serial number of the equipment when making a warranty
claim. Warranty repairs may only be carried out by approved Ryval
service providers. Please contact your local Ryval supplier for more
information.
13.1 Terms of warranty
The Multiprocess 175 machine has a limited warranty that covers
manufacturing and material defects only. The warranty is affected on the
day of purchase and does not cover any freight, packaging and insurance
costs. Verbal promises that do not comply with the terms of warranty are
not binding on the warrantor.
13.2 Limitations on warranty
The following conditions are not covered under terms of the
warranty: loss or damage due to or resulting from natural wear and
tear, non-compliance with operating and maintenance instructions,
connection to incorrect or faulty voltage supply (including voltage
surges outside equipment specs), incorrect gas pressure overloading,
transport or storage damage or fire or damage due to natural causes
(e.g. lightning or flood). This warranty does not cover direct or indirect
expenses, loss, damage or costs including, but not limited to, daily
allowances or accommodation and travelling costs.
Modification of the primary input plug or fitment of a lower rated
primary input plug will render the warranty null and void.
NOTE
Under the terms of warranty, welding torches and their consumables
are not covered. Direct or indirect damage due to a defective product
is not covered under the warranty. The warranty is void if changes are
made to the product without approval of the manufacturer, or if repairs
are carried out using non-approved spare parts. The warranty is void if a
non-authorised agent carries out repairs.
→
Leads and cables should be kept clear of passageways.
→
Keep fire extinguishing equipment at a handy location in the shop.
→
Keep primary terminals and live parts effectively covered.
→
Never strike an electrode on any gas cylinder.
→
Never use oxygen for venting containers.
Some safety precautions Ryval recommends are as follows:
→
Repair or replace defective cables immediately.
→
Never watch the arc except through lenses of the correct shade.
→
In confined spaces, adequate ventilation and constant observation
are essential.
Diagram and safety explanation
Electrical safety alert
Wear dry, insulated gloves
Welding electrode causing
electric shock
Insulate yourself from work and ground
Fumes and gases coming from
welding process
Disconnect input power before working on
equipment
Welding arc rays
Keep head out of fumes
Read instruction manual
Use forced ventilation or local exhaust to
remove fumes
Become trained
Use welding helmet with correct shade of
filter