14.
Fix the brackets with recovery
points, using bolts M12x60, washers
M12 and nuts M12.
* Tighten all screw joints.
15.
Use templates, attached in the end
of this manual, to cut the holes, for
recovery points, in the bumper
Cut template following dashed line for
left recovery point (attachment 1)
,
remove area #1 and #2, as shown.
Make the same actions for right
recovery point using template
(attachment 2), remove area #1 and
#2.
* Stick the template over for more
hardness, using scotch tape
.
Installation manual
2D.9103.1
<
Page
8
of
1
2
>
www.rival4x4.com
Date:
29.05.2019
Инструкция по установке
INSTALLATION PROCEDURE
