7
www.rivatech.de
1
Micro SD Card Socket
It is a memory card slot for external storage.
2
LAN Connector (Ethernet)
This is a RJ45 LAN connector for 10/100 Base-T Ethernet.
This LED lights up as orange and turns green when the encoder is powered on.
LED operation setting:
For the factory default setting, LED 2 blinks for the heartbeat and LED 1 turns on for
video signal. To change its setting, refer to the section
4.5.12. LED Setting
of the
RIVA Web Interface Manual.
3
8 pin terminal block for audio, DI, and DO
Refer to the section “5.1.Connectors” for more specific information.
4
6 pin connector for analog video output, RS485, and power
Refer to the section “5.1.Connectors” for more specific information.
5
Reset
Reset switch is used for restarting the camera or resetting it to Factory Default (FD).
Refer to the section “6.3. Reset” for more specific information.
LED1 LED2
