8
3. PART NAMES
1.
Fan
The fan and heater (underneath the black panel) are implemented for controlling
temperature and humidity level.
2.
Reset button
The reset button can be used for restarting the device or resetting it to Factory
Default. Refer to 6.3. Reset and 6.4. Factory Default for more details. Reset button is
located under PCB.
3.
PAL/NTSC button
The initial factory version setting is free from PAL or NTSC. Push the button once to
set as PAL format. Push the button twice to set as NTSC. Push the button one more
time to return to no video output mode. Please note that the analog video signal is only
3 minutes present and go back automatically to none video output mode (only
installation process). PAL/NTSC button is located under PCB
* Models and their appearance are subject to change without any prior notice.
⑦
