RC4602 Ver1.1
www.rivatech.de
Step3. Set the lens position
The device is 360° rotating camera and fully controlled by web user interface. Once the
unit’s installation is complete and connected properly, please refer to IPXIPN Web User’s
Manual for the device’s camera configuration instructions.
Step4. Set up network environment
The default IP address of the device is 192.168.XXX.XXX. Users can identify the IP address of
the device from converting the MAC address’s hexadecimal numbers, which is attached to the
device. Be sure that the device and PC are on a same area network before running the
installation.
Generic IP Environment
In case of generic private network environment where IP address 192.168.XXX.XXX are
used, users may view the live streaming images on a web page using the device’s default IP
address:
1.
Convert the device’s MAC address to the IP address. Refer to the Hexadecimal-Decimal
Conversion Chart at the end of the manual.
(The MAC address of the device is attached on the side or bottom of the device.)
2.
Start the Microsoft® Internet Explorer web browser and enter the IP address of the device.
3.
Web streaming and device configurations are supported through ActiveX program. When
the ActiveX installation pop-up window appears, authorize and install the ActiveX setup.exe,
MAC address = 00-13-23-01-14-B1
→
IP address = 192.168.20.177
Convert the last two set of hexadecimal numbers to decimal
numbers.
