Commissioning 7
CMC-TC Wireless I/O-Unit
9
EN
1
Fig. 9
Unit detection browser window
Key
1
Status display of the sensor island
The "Unit detected" message appears in the
browser window of the Processing Unit.
Continue to press the
C key
on the Processing Unit
until the Status LED of the CMC-TC Wireless I/O-
Unit switches to a continuous green.
1
2
3
Fig. 10
Overview display browser window
Key
1
Overview display
2
Status of the I/O-Unit
3
Clear button
The CMC-TC Wireless I/O-Unit has now been de-
tected.
7.2 Registering Sensors
1
2
Fig. 11 Wireless I/O-Unit (programming status)
Key
1
C key
2
Wireless connection LED
Press the
C key
on the Wireless I/O-Unit for three
seconds. The wireless connection LED now flashes
alternately red, yellow and green. The CMC-TC
Wireless I/O-Unit is now in programming mode.
2
1
Fig. 12 Wireless sensor (lower side)
Key
1
Status LED
2
Micro pushbutton
Press the Sensor micro-pushbutton (Push) located
on the lower side one second. The Status LED on
the sensor illuminates once briefly. If the registration
process was successful, the Wireless Connection
LED of the CMC-TC Wireless I/O-Unit flashes green
for approximately two seconds, then alternately red,
yellow, green. Simultaneously, the Status LED on
the CMC-TC Wireless I/O-Unit flashes alternately
red, yellow and green.
Note!
During the registration process, the dis-
tance between the sensor and the Wire-
less I/O-Unit may not exceed 5 m, be-
cause the I/O-Unit operates with reduced
transmission power in this mode.
No other I/O-Unit within a 5 m range must
be in registration mode during the regis-
tration process.
Note!
For the commissioning of the sensors,
please observe information provided in
the Wireless Sensors manual.
1
2
Fig. 13
Sensor identification
Key
1
Status display of the sensor island
2
Clear button
"Configuration changed" appears in the browser
window. Press the
Clear
button (possibly several
times). The sensor is now registered to the I/O-Unit.
To test the registration, click in the overview display
the name of the I/O-Unit (here: CMC-TC-IOW). The
overview of the registered sensors is now displayed.
