4
Rittal CMC III transponder reader VX
1 Notes on documentation
EN
1
Notes on documentation
1.1 CE labelling
Rittal GmbH & Co. KG hereby confirms that the CMC
III transponder reader VX is compliant with the EC EMC
Directive 2014/30/EC. An appropriate declaration of
conformity has been prepared. It can be provided on
request.
1.2 Storing the documents
The assembly and operating instructions as well as
all applicable documents are an integral part of the
product. They must be passed to those persons who
are engaged with the unit and must always be avail-
able and on hand for the operating and maintenance
personnel.
1.3 Symbols used in these operating in-
structions
The following symbols are used in this documentation:
Danger!
Hazardous situation leading directly to
death or serious injury if the instruc-
tions are not followed.
Warning!
Hazardous situation which may lead
directly to death or serious injury if the
instructions are not followed.
Caution!
Hazardous situation which may lead to
(minor) injuries if the instructions are
not followed.
Note:
Identification of situations that can lead to
material damage.
◾ This symbol indicates an "action point" and shows
that you should perform an operation or procedure.
1.4 Associated documents
– Installation and Short User Guide
– Assembly and operating instructions for compatible
base systems, e.g. CMC III Processing Unit
Note:
Additional compatible base systems can be
found on the internet at www.rittal.com for
model no. DK 7030.233. The term "base
systems" is used in these instructions as
placeholder for the various systems.
– CMC III Access Control/Door Control Module (DCM)
assembly and operating instructions
