Section 2
Installation
13
2.6
Vehicular installation
The Loudmouth
®
receiver can be powered with an optional Ritron model CCL-M cigarette lighter adapter
for use in mobile applications.
Route the CCL-M power cord away from the antenna and speaker wires.
2.7
Temporary outdoor installation
The Loudmouth
®
receiver can be temporarily installed outdoor with the use of weatherproof enclosures.
The Ritron model LMH-100 is a weatherproof, fiberglass reinforced polyester enclosure designed to
house the Loudmouth
®
receiver and antenna. Speaker and power connections are routed from the
bottom of the enclosure through electrical conduit.
The LMH-100 includes:
Dual stainless steel, pad lockable latches
Nema 3 weatherproof, fiberglass reinforced polyester enclosure
Mounting flanges for flat surface
Dimensions: 13”H x 10.5”W x 5.5”D Weight: 8 lbs.
Ritron model RSS-200 20W solar panel kit can be used to power the Loudmouth
®
receiver without
the need for the RPS-1B power supply in locations where AC power is not available.
The RSS-200 includes:
20-Watt solar panel with mounting bracket
35AH sealed rechargeable battery
Solar charge controller
Nema 3 weatherproof, fiberglass enclosure
Mounting flanges for flat surface
Dimensions: 12”H x 10.25”W x 6.25”D Weight: 10 lbs.
The RPS-1B power cube can be temporarily plugged into an outdoor outlet with a large in-use
weatherproof cover such as the TayMac model MM420
(available in Lowe’s Hardware stores
nationwide).
When the speaker is mounted on the roof of a vehicle at head
level the volume level should be reduced to 50% or less to
prevent hearing damage.
CCL-M
RSS-200
MM420
LMH-100
