Section 2
Installation
12
2.5
Installing multiple Loudmouth
®
receivers and PA speakers
Many locations may require the installation of multiple Loudmouth
®
receivers and PA speakers. Multiple receivers and PA
speakers are used when:
Paging separate buildings is required.
The coverage area is too large for a single receiver and PA speaker.
Zone paging is required.
Paging is required in more than one location.
Zone paging, or paging in more than one location requires a separate Loudmouth
®
receiver for each area.
With zone paging all radios can operate on the same Loudmouth
®
radio frequency.
Each Loudmouth
®
receiver can be programmed for a unique paging code, allowing selective paging to each zone.
The Loudmouth
®
receivers can be programmed for an All Call* code that allows paging of all zones at once, or
Group Call* to page more than one zone.
Zone paging allows for volume levels that are programmed to the specific needs of that area.
If zone paging is not necessary, all Loudmouth
®
receivers can be programmed for the same paging code.
* All Call and Group Call code programming requires the Ritron Loudmouth
®
PC Programmer.
Example of Zone paging
Zone 1
– Warehouse and loading dock
Single Loudmouth
®
receiver with 2 speakers.
One speaker is located inside the warehouse and the
other is located outside for the loading dock.
Speaker volume is set to 50% for the warehouse
environment.
Zone 2
– Cafeteria
Single Loudmouth
®
receiver with 1 speaker.
The speaker is located inside the cafeteria area.
Speaker volume is set to 25% for the restaurant
environment.
Zone 3
– Sales office
Single Loudmouth
®
receiver with 1 speaker.
The speaker is located inside the Sales office.
Speaker volume is set to 10% for the office environment.
