10
Liberty
Radio Extender System User’s Installation Guide
S
T E P
4 - C
O N N E C T I N G
P
O W E R T O T H E
L
I B E R T Y
R
E P E A T E R
.............................
NOTE:
DO NOT CONNECT POWER TO THE LIBERTY REPEATER UNLESS ANTENNA IS CONNECTED TO
REPEATER AND POSITIONED AT LEAST 7 ft. FEET AWAY!
Plug the included Ritron power supply cube model RPS-1A into a source of 110 VAC and route the cable from the
RPS-1A wall cube to the Liberty
Repeater jack labeled “DC IN”. The unit will automatically “power up” as soon
as the power supply is connected to the Liberty repeater. The “green” LED on the unit will light indicating the unit
is “ON”. The cable from the power supply should be routed in a straight line (see
FIG-8
“Proper Routing of
Antenna and Power Cables”. The power cable plugs into the Liberty
Repeater in the jack labeled “DC IN”.
FIG-8: Proper Routing of Antenna and Power Cables
WIRELESS COMMUNICATIONS PRODUCTS and SYSTEMS
RITRON, INC.
∙
P. O. Box 1998 Carmel, IN 46082
Phone: 317-846-1201
∙
Fax: 317-846-4978
Email: [email protected]
∙
Web:
www.ritron.com
