RITEWAY ROCK PICKER 250, Operator'S Manual & Parts

Page: 18 / 43

12
ROCK PICKER 250
Maintenance
General
•
Repack the wheel hubs after the first 500 travel miles; then yearly thereafter.
•
Visually inspect the wheel bolts for tightness each day. Riteway torque recommen-
dation to 110 ft
- lbs after the first few hours of operation and frequently there after,
(manufactures torque recommendations 90 to 131 ft - lbs).
•
Requires 3 - 1/2 to 4 - 1/2 HP per foot.
Every 8 Hours (Daily)
•
Grease all pins and knuckles. ( See page 13 for detailed diagram ).
Every 100 Hours (Monthly)
•
Visually inspect hydraulic hoses & fittings for leaks or damage.
•
Inspect lighting system and electrical harness for damage
Annually
•
Inspect wheel bearings / hubs and grease.
•
Check wheel bolts and re - torque.
•
Check tire pressure, follow tire manufactures inflation recommendations.
•
Visually inspect unit for loose, worn or damaged components.
Storage
•
Coat any exposed cylinder shafts with thick oil or grease.
•
Ensure that parking jacks are situated on firm ground.
•
NOTE: If jack pads sink into ground, it will be difficult to hook up unit.
•
Lock all applicable safety pins into place.
Maintenance