PG
11
PG
12
4 Special Features
Swing
Swing setting determines the temperature difference from
ON to OFF that the thermostat will command the HVAC system to run.
ï With the MODE switch in HEAT or COOL, press the
MENU
button.
ï Touch the
SWING
icon and the current setting of temp swing is shown
on the display (default at 3 ).
ï To change the swing, touch the left or right arrows.
The furnace will cycle more at lower numbers, keeping temperture more constant.
To complete the swing setting, push the
HOME
button.
12/24 hour
The thermostat can display time in 12 or 24 hour formats. At the
HOME screen touch the time display to toggle from 12 to 24 hr display.
E.L. Backlight
Backlight comes on automatically when the touch screen is
touched or press the Backlight button for 16 sec of illumination.
DST Seting
At the MENU screen, the DST toggles the clock on and off
Daylight Savings Time.
Low Battery
When the batteries are low, the battery
icon will come on and flash. The two AA Batteries in
the unit need to be replaced. In some installations your heater system will
stop functioning when the thermostat loses power.
ï
Replace batteries as soon as you see this warning.
The thermostat
programs will remain for 30 seconds while the batteries are changed.
ï
Do not take longer than 30 sec
to change the batteries in your unit or
you will lose all custom settings and all programming. Only the Energy-
Star
TM
program will remain. Once the batteries are replaced, the system will
return to normal in 2 seconds.
Lock
Allows you to prevent any changes in custom settings.
ï To lock, touch the LOCK icon on the MENU screen for 5 sec.
ï To unlock, Touch the locked icon for 5 sec.
Filter
The 8082C has a feature that keeps track of actual furnace
run time and reminds you to periodically replace your system's air filter.
ï Press
MENU,
from the
HOME
screen, and touch
FILTER
icon.
This will display your accumulated filter run time.
ï To input a new filter life time, touch the
FILTER
icon for 3 seconds.
ï Input the lifetime hours for your new filter.
ï To zero the filter timer for a new filter, touch the
accumulated time display.
ï To leave the filter display, touch
HOME