PG
7
PG
8
3
Program
NOTE:
60 Second Rule-During
programming, if a button is not pushed in 60
seconds, the unit will return to the home screen. Everything you have changed
while programming will be saved.
Press PROGRAM, from the HOME screen, to go to the program screen -
Select HEAT with the HEAT/COOL MODE switch -
Select the PROGRAM (A or B)
you want to set -
ï Touch the
PROGRAM
icon to select A or B.
NOTE: program
A
has 4 time slots,
B
can have 2 or 6 time slots.
Select the day
you want to program
-
ï Touch the
Day of the week
area to cycle through the
days of the week to select the desired day.
Select the time slot you want to program
-
ï Touch the
Time slot
area to cycle through the
available time slots, until it displays the desired time slot.
Select the time of day
(must be done in
HEAT
mode)-
ï Touch the
Time of Day
arrows to move the time selection
forward or backward until it displays the desired time.
COOL
times will be the sames as these HEAT times.
Forward
Backward
Select the desired temperature
-
ï Touch the
UP temp / Down temp
arrows
.
Repeat the above procedures for each day of the week and
each time slot of the day as desired.
To REVIEW
your program touch
REVIEW.
Each time slot for each day or set of
identical days, will be displayed every 3 seconds.
Return HOME by touching the home icon.
To COPY the program from the current day to another day
-
ï Touch
COPY
on the program screen. The current day will remain solid, the
destination day will flash.
ï Touch the day area to advance the day and select a copy destination.
ï Touch COPY again to copy all settings to the destination day.
To program for cooling -
ï Select COOL with the Heat/Cool MODE switch and repeat the above procedure.
NOTE: Due to the requirements of AUTO mode,
Time of Day
will not be available in
COOL programming, and all temperatures must be 3
o
F or more above the HEAT temp for
that time slot. This avoids HEAT - COOL control conflicts over time or target temperature.