background image

Manual Part #:

 54450031

Model:

 REVOLUTION, ROGUE

Publication:

 AMEN00064 2019-03-07

Revolution

®

 HVLS Fan

Rogue

®

 HVLS Fan

Installation/Service/Owner's Manual

This manual covers units shipped February 2019 to date.

Language:

 English  

(Hazards: English, French)

NOTICE TO USER

                             2

SAFETY 

                                       2

INSTALLATION

Components                                   4

Required Tools                                  4

Specifications

                                 4

Fan Clearance, Air Intake                        5

Step 1 – Mounting Preparation                     6

Step 2 – Mounting                              6

Step 3 – Motor Bracket                           9

Step 4 – Safety Cables

  (INCLUDED WITH KIT)

       10

Step 5 – Stabilization Cables

  (INCLUDED WITH KIT)

   11

Step 6 – Attach Blades                            11

Step 7 – Level Hub                              11

Step 8 – Fan Electrical Installation

 (TYPICAL)

         12

Step 9 – Control Box                           13

Step 10 – Label Plate                            13

Step 11 – Motor Cover                           13

Fan Guarding                                 13

ELECTRICAL

Motor Wiring                                  14

Conduit Restrictions                            14

Control Box Wiring                             15

EMC Compliance 

(OPTIONAL)

                     16

MAINTENANCE

Planned Maintenance                          17

TROUBLESHOOTING

Run / Test                                    17

Motor                                        18

PARTS

Mounting                                    20

Extension Tube Assemblies, Cables                21

Motor Cover, Motor Assembly                     22

Blades                                      22

Hub                                        22

Controls 20                                   23

WARRANTY

                                   24

Fan‑Commander 2.0

Required to operate the fan(s) (ordered separately) 
Use Fan‑Commander 20 manual with this manual  

for complete installation and operation instructions

Summary of Contents for Revolution HVLS Fan

























Reviews: