Basic Operations
Printing from Paper Documents
49
Printing with Mono-Color
The operating procedure for Mono-Color Printing by using either Print Drum (Cylinder) 1 or Print Drum (Cylinder) 2
is explained here.
Important!:
• For Mono-Color printing, either Print Drum (Cylinder) 1 or Print Drum (Cylinder) 2 may be used, but we recommend
using mainly Print Drum (Cylinder) 1.
1
Make sure the machine is ON.
Check the Control Panel.
Note:
• When the power is OFF, both the Display and
the
key are off. Turn the power ON.
• If the
key is lit, the machine is in Energy
Saving mode. Press the
key to cancel
Energy Saving mode.
2
Check for printing paper.
Make sure the paper is loaded.
To load or to change the paper, see the following
page:
After replacing with paper of a different size,
adjust the position of the Receiving Tray Paper
Guides and Paper Stopper.
3
Check the Display.
When the Recognition Screen is
displayed.
Follow the message on the screen.
For details, see
The initial screen will be displayed after the
user has been identified.
When the initial screen is displayed
Proceed to step 4.
The initial screen differs depending on the set-
ting of “Display Priority” of “Admin.”.
4
Touch the button of the Print Drum
(Cylinder) to use on the Mode
Screen.
Note:
• The
button uses Print Drum (Cylinder) 1 for
Mono-Color printing, the
button uses Print
Drum (Cylinder) 2 for Mono-Color printing.
• If
/
is displayed next to the
button, the A4/Letter-R Drum (Cylinder) is set.
• The colors currently set for Print Drum (Cylin-
der) are displayed correctly on this screen.