Preparing to Print
38
Basic Operations
Preparing to Print
First set up the Paper Feed Tray and Paper Receiving Tray of the machine.
Important!:
• Do not use unsuitable paper, or mix papers of different sizes.
It might cause paper jams and damage the machine.
Setting up the Paper Feed Tray and Loading the paper
1
Turn the power ON.
2
Open the Paper Feed Tray.
Pull the Paper Feed Tray to open it, until it comes
to a rest.
3
Load paper.
1)
Place paper in the printing orientation.
2)
Slide the Feed Tray Paper Guides to fit to the
sides of the paper. Then turn the right and left
Feed Tray Paper Guides Levers to lock the
guides.
: Unlock
: Lock
Important!:
• Make sure that the Feed Tray Paper Guides fit
tight up against the paper.
Failure to do so can produce undesired results.
• When printing with the A4/Letter-R Drum (Cyl-
inder) set to Print Drum (Cylinder) 1, set it such
that the long edge of the A4 paper follows the
paper feed direction.
ON
OFF
