ENTER PASSWORD
ENTER PASSWORD : Password protection can be
enabled to prevent unauthorised access to basic
setting’s sub-menues, by default password is set to
0000.
APFC allows user to set password in range 0000 to
9999. Password protection is enabled by selecting a
four digit number other than 0000.
Password Setting:
To change password please refer section 11.7
Section 10 BASIC SETTINGS
Press ENTER key to enter into Basic setting.
CT PRIMARY
CT PRIMARY :This parameter allows user to set
Current transformer’s primary value. Value is settable
from 0001 to 9999 Amp.
Press ENTER key to edit CT PRIMARY value.
Pressing UP or DOWN key will increment or decrement
digit value. Then pressing ENTER key will advance to next
digit & confirm newly changed values.
CT SECONDARY
CT SECONDARY : This parameter allows user to set
Current transformer’s secondary value. Value can be
set as 1 or 5 Amp.
Press ENTER key to edit CT SECONDARY value.
Pressing UP or DOWN key will increment or decrement
digit value. Then press ENTER key to confirm newly
changed values.
19
