Please contact your local dealer with Questions regarding mounting profiles for modules.
Please check appearance of the modules before installing or using.
Notes on Installation
Clearance between the module frame and the mounting surface is required to allow cooling air to circulate around
the back of the module. This also allows any condensation or moisture to dissipate.
The module should never be sealed to the mounting surface with sealant that prevents air from circulating under the
module.For roof-mounted modules,the minimum Distance between the roof and the modules should be 5cm (2
inch).This module has 8 elliptical hole for installation ,with dimension 9*14mm,4 on each longer side. For installation
safety ,we recommend that the minimum torque of screw between 5~8N.m.
We recommend installation methods shown in below.In some areas, local electrical and building codes may govern
the installation and use of PV modules.
Please noted all washers,nut and bolt are stainless steel.