background image

 

Agility User Manual 

Page 22 

To set/change a user code: 

1.

 

Press 

 

2.

 

Enter your code 

3.

 

Using the arrow keys, scroll to the option 

Codes/Tags 

from the User Functions 

menu and press 

 

Note:

 If you enter a wrong user code, the keypad produces 3 short beeps and the "

Wrong Code. Please Try 

Again

" message will be heard. Press 

 quickly and re-enter the above sequence correctly. 

4.

 

You will see the option 

New/Change

. Press

  

5.

 

Enter the two-digit User Index number to which you want to assign a user code 
For example, to assign a user code to user index number 6, press

 

Note:

 In the 

Agility

 system, the User Index number is from 00 to 32, where 00 belongs to the Grand Master. 

6.

 

Enter the new code and press

. If successful, a single confirmation beep is 

sounded, if not, 3 quick error beeps are sounded 

7.

 

Repeat the above steps for additional codes until you have completed your list 

8.

 

When all codes have been entered, press

 quickly to reset and exit the 

User Functions menu 

Deleting User Codes 

At times, you may want to completely delete a user code. Note that it is impossible to 

delete the Master Code (although it can be changed). 
The system must be disarmed in order to delete user codes. 

To set/change a user code: 

1.

 

Follow steps 1-3 of the previous procedure (See 

Setting/Changing User Codes

2.

 

Scroll the menu to the option "Delete". Press

 

3.

 

When requested to enter a new code press

followed by

. If successful, a 

single confirmation beep is sounded, if not, 3 quick error beeps are sounded 

4.

 

Repeat the above steps for deleting additional codes 

5.

 

When all required codes have been deleted, press

quickly to reset and exit 

the User Functions menu. 

Summary of Contents for Agility

































Reviews: