Risco Agility, User Manual

Page: 19 / 32

Agility User Manual
Page 19
Notes: SMS commands can be sent from any mobile phone or from an SMS website.
Command words are not case sensitive.
A separator between command words is not required although it is accepted.
SMS Confirmation Message
A confirmation message following a SMS operation is sent to the user, upon request, by
adding the letters “ RP ” at the end of the SMS messages listed below.
Example:
1234 A RP - A confirmation message following an arming operation will be sent to the
user.
Confirmation or Fail operation messages can be assigned to the actions of arming,
disarming, bypassing, activating outputs or changing follow me definitions.
Note: For full SMS capabilities refer to your GSM/GPRS instruction manual.
3.3 Configuration Software
You can operate your system via RISCO Groups Configuration Software. Refer to your
Configuration Software manual for detailed information.
3.4 Web Browser
Using the web you can perform the following operations on your system: arm, disarm,
output activation, receive status information and view event logs.