9
WAR N I NG AN D SAF ET Y NOTE S
These warnings and safety notes are particularly important. Please follow the
instructions for maximum safety or the charger and the battery can, at best, be
damaged, or worst cause a fire.
Never leave the charger unattended when it is connected to its power supply. If any malfunction is found,
TERMINATE THE PROCESS AT ONCE and refer to this manual.
Keep the charger well away from dust, damp, rain, heat, direct sunshine and vibration. Never drop it!
The allowable input voltage is 11-18V DC or 100-240V AC but not both at the same time.
This charger and the battery should be put on a heat-resistant, non-flammable and non-conductive surface.
Never place on a car seat, carpet or similar. Keep all flammable and volatile materials away from the
operating area.
Make sure that you know the specifications of the battery to be charged or discharged to ensure that it
meets the requirements of this charger. If the program is set up incorrectly, the battery and charger may
be damaged. It can also cause a fire or explosion due to over charging.
Always charge in well ventilated areas!
NiCd/NiMH
Voltage level: 1.2V/cell - Allowable fast charge current:1C-2C (depends on the performance of the
cells) Discharge voltage cut off level: 0.85V/cell (NiCd), 1.0V/cell (NiMH)
Li-ion Voltage level: 3.6V/cell
Max.charge voltage: 4.1V/cell - Fast charge current: 1C or less
Min.discharge voltage cut off level: 2.5V/cell or higher
Summary of Contents for Sigma EQ ECO II
Page 1: ......
Page 35: ...Notes...
