ERROR BATTERY
VOLTAGE ERROR
Input voltage is below 11.0V or exceeds 15V.
Error Messages
NO BATTERY
Battery is not connected to the charger’s output banana sockets.
OUTPUT BATTERY
REVERSE POLARITY
Battery is connected to the output banana sockets in reverse.
OUTPUT CIRCUIT
PROBLEM
The circuit of the charger has a problem.
CHECK THE BATT.
OPEN CIRCUIT
Battery has become disconnected during an operation.
CHECK THE BATT.
OVER VOLTAGE
Wrong voltage is set while charging Lithium or Pb batteries.
CHECK THE BATT.
LOW VOLTAGE
Wrong voltage is set, or batteries are over discharged, while charging Lithium or Pb batteries.
BALANCER VOLTAGE
IS TOO HIGH
Voltage per cell is too high during balancing. The pack may be faulty.
BALANCER VOLTAGE
IS TOO LOW
Battery cells are short-circuited during balancing. The pack may be faulty.
DON’T CHARGE LiXX
WITH THIS MODE
If the charger attempts to start charging, discharging, or cycling with settings for NiCd/MH, or
Pb batteries while there is a balancing cable connected to the balancing port of the charger.
This helps prevent charging Lithium batteries in the wrong charge mode.
16