Lilo DISCHARGE
D=0.50A 10.8Vp
Setting Discharge Current
Adjust the desired discharge current from 0.10A to 1.00A (0.01A per step) with the INC & DEC buttons. Press the
ENTER button to confirm the setting. This current will be automatically limited to maintain 5W maximum.
Lithium Type
LiPo
Setting Battery Type
Choose the desired battery type (Li-Ion, Li-Po or Li-Fe ) with the INC & DEC buttons. Press the ENTER button to
confirm the setting.
For safety purposes, this charger is designed to automatically deliver a 1C charge rate to batteries of Li-Ion, Li-Po or Li-Fe, based on the user
selected battery capacity unless over-ridden specifically for batteries designed to accept 2C charging.
Example: Li-Po cell of 1500mAh capacity : 1C = 1500mAh ( = 1.5A ) charge current.
Note : The maximum voltage for Li-Ion is 4.1V per cell, 4.2V per cell for Li-Po batteries and 3.7V per cell for Li-Fe batteries.
Therefore, it is extremely important to choose the correct Lithium battery type to be charged, as each Lithium battery has a
different voltage level. If not, it may cause very serious damage to the batteries and increase the risk of a fire!
BALANCER CON.
NOT CONNECTED
The left screen will be shown if the Lithium charge or discharge starts without the balancing cable connected to the
balancing port of the charger.
BALANCER CON.
CONNECTED
The left screen will be shown if the Lithium charge or discharge starts with the
balancing cable connected to the balancing port of the charger.
12