46 Nooks Hill Road
Cromwell, CT 06416
Phone: 800-528-8665
Int’l: (01) 860-635-2200
Fax: (01) 860-635-3631
e-mail: [email protected]
Internet: www.ripley-tools.com
Warranty: RIPLEY warrants its products against defective materials and workmanship for a period of one year
from date of shipment from the RIPLEY factory provided the product is utilized in accordance with instructions
and specified ratings.
Instructions for WS5-M - Part 2
Step 5.
(Fig. 5) Before stripping the insulation, adjust the
blade edge to 0.39mm - 0.79mm above the conductor surface
by inserting the provided hex wrench through the hole
located beneath the tool blade.
Step 6.
(Fig. 6) Rotate the tool clockwise around the cable
to remove the insulation. Insulation will peel off until the
cable conductor reaches the stop bar. The blade will
automatically sever the insulation cleanly at the end of the
cut.
(Fig. 7) To remove the bushing, depress the lock release
pin on the housing and slide the bushing out.
TOOL
BLADE
1/6” HEX
WRENCH
Fig. 5
Fig. 6
STRIPPED
INSULATION CURL
Fig. 7
LOCK
RELEASE PIN
NOTES
•
To strip more than 95mm of insulation, Remove the stop
bar and collar.
•
If extra leverage is needed to strip insulation, use the
Utility Tool Ratchet Wrench, Model SW2
Model
Part #
Blade
Blade Part #
Rotating Stop Bar
Part #
WS5-M
42273
CB7-2
10324
42270
REPLACEMENT PARTS
SW2
Ratchet Wrench
42274
rev.1
08-12-10 ff
