M-UM007-04 Page 3
8. Battery Charger Input
The VIS 300C comes with a 12.6-volt Lithium-Ion wall charger.
To charge the VIS 300C between uses, plug the wall charger into an outlet and plug the charging
adapter into the battery charger port on the side of the VIS 300C.
The indicator light on the wall charger will be red when charging and green when fully charged.
Charge time is approximately three hours.
Charging
Fully Charged
***NOTE***
Only the approved charger from ODM may be used to charge the VIS 300C. Use of any third-party
wall charger will void the warranty on the VIS 300C. Use of non-approved chargers may cause
personal or property damage.
Contact ODM to obtain approved replacement charger packs.
Protective Boot
Inspection Scope
Interchangeable
Inspection Tip
Analysis Button
(On Side of Probe)
Focus Ring
9
10
11
12
13
