M-UM007-04 Page 4
Phone: 603-524-8350
Web:
9. Protective Boot
The VIS 300C monitor is housed in a molded rubber boot. The stand on the back of the boot folds
open to provide an angled view of the screen when placed on a flat surface, such as a desk. The unit
can be hung around the neck for field use if a strap is connected to the two extended “rings” on the
top side of the boot.
10. Inspection Scope
All models of the VIS 300C come with a high-definition inspection scope. This scope provides a wide
viewing area on the fiber endface to ensure accurate automated analysis within the VIS 300C software.
11. Focus Ring
When inspecting bare fiber ferrules and patchcords, the Focus Ring on the inspection scope should be
used to endure optimal focus. If inspecting fiber inside a non-moveable bulkhead, the probe body can
be turned to focus the image. This is ODM’s proprietary External Focus Mechanism.
12. Interchangeable Inspection Tip
Each inspection tip can be attached and removed using the threaded attachment ring on the
inspection scope. ODM offers inspection tips for many common and uncommon connector styles
across several industries.
13. Analysis Button
Each inspection scope included with the VIS 300C has a button on the side of the probe body. This
button will initiate analysis when a live fiber image is shown on the Main Inspection screen of the VIS
300C application. The button will also return the user to a live image after the analysis has been run.
Touch this button to navigate to the power
meter page of the software.
Power Meter
This button controls the onboard VFL.
VFL
View system information, setup Wi-Fi,
connect email accounts, and more.
Settings
*
Touch here to begin automated analysis
using current settings.
Analyze
Touch here to toggle high and low
magnification zoom.
Zoom
Create, edit, and delete projects; view saved
data and create/send closeout reports.
Projects
Touch here to save the onscreen image
(analyzed or live) to the currently-selected
project folder.
Save
Basic Software/UI Navigation
*
Navigate to Settings>About and touch the “User Manual” button for a complete walkthrough of all
software features.
