Page 3
VIS500 User Guide
The VIS500 Fiber Inspection Scope is a low cost, Auto Focus Wireless Inspection scope for verrifying compliance with the
IEC 61300-3-35 Specification. This document will serve as an overview of the major features and functions of the device
as well as instructions for use with the Windows, and mobile InSpec applications. If you are looking for a standalone
inspection system take a look at the VIS300C inspection system. Or if you are looking for a device that can be used with
windows at a lower cost take a look that the VIS500
Introduction
MFB Button
When pressed this will initiate a focus and analyze
routine by default however it can be changed in the
software
Charging Port
The USB cable is used to connect to the
VIS300C or windows PC
Connector Adapter
The VIS500 comes with a universal 2.5 adapter by
default, however additional adapters are available and
are user replaceable.
Device Overview
Status Light
This light is used to display the connection status
of the VIS500 aswell as Display Pass Fail Results
Charging Status LED
This LED is used to show the battery and
charging status.
Power Button
This button when held for 5 seconds
power on or off the device.
