19
SPOT X BEACH INTRODUCTION
Just in case you can’t find a preset location that can be customized to your
local beach. Your watch is equipped with a Spot X averaging tide function.
Spot X follows the world accepted average tide cycle of 6hrs 12mins and
25 seconds from High tide to Low tide. Spot X is present at the bottom of
EVERY beach list.
SPOT X SETTING
-Select Spot X from any beach list. (See tide setting p.17)
-Find the next HIGH tide time for the beach you want to create and set the information
using the procedure below. (Tide information can be found in the local newspaper or
tide guide)
-In TIDE mode HOLD LAP/RESET in for 2 seconds, the year will appear and flash,
use START/STOP & LAP/RESET to select the year.
-Press MODE/SET, the MONTH will flash in the top left hand corner.
-Use START/STOP & LAP/RESET to enter month of the next high tide.
-Press MODE/SET the DATE will flash, use START/STOP & LAP/RESET to enter date
of the next high tide.
-Press MODE/SET, the HOUR will flash, use START/STOP & LAP/RESET to enter
hour of the next high tide.
-Press MODE/SET, the MINUTES will flash, use START/STOP & LAP/RESET to enter
minutes of the next high tide.
-Press MODE/SET, the S of Spot X with flash. You can rename Spot X to your local
beach name by following procedure below, or to leave the name as Spot X, simply
HOLD MODE/SET in for 2 seconds to set and save all new Spot X information.
-Or use START/STOP & LAP/RESET to scroll through the alphabet and change the
selected letter. Press MODE/SET to move to the next letter.
-Once complete, HOLD MODE/SET in for 2 seconds to save all.
NOTE:
When Spot X is set no RANGE information will be displayed, only the time of
the next tide and tide direction graph will be displayed.
